Parametric USB Organizer with screw holes (on the back) to mount it on a wall.
There are many models for USB holders/organizers in Thingiverse but all I cound find were in one row so I made a model with OpenSCAD and decided to share it here. This model is suitable for wall mounting.
This model is a customizable model, you can use Thingiverse Customizer to customize.
Body:
* number of rows
* number of columns
* spacing between the holes
* corner radius
Screw holes (on the back)
* diameter of the screw head
* diameter of the screw shank/threat
* height of the screw head
* tolerance of the screw head hole.
Connector
* size of the connector (the defaults are for USB A)
* tolerance of the connector hole which you can tweak so the holes aren't too tight. I have used 0.3mm which gives a snug fit. Please note - if your printer is not calibrated you should use something like 0.5. The tolerance can also be filament brand/type dependent due to shrinkage. So test it with a small piece before you print a large one.
Sepio
