Easy small compact strong pan tilt

I have tried many pan&tilt systems on here but non of them gave me strong and easy fitting parts.
So I decided to make my own.

• Its easy to assemble (If not let me know!!! I can change it).
• Different options for you to chose.
• Compact design.

---

Parts needed to compleet:

• M3x10 Screw
• 2x 9gram Servo

Optional parts:

• M3 ring.
• M3x4 Press-nut

---

Tools needed:
Screwdriver
Hotglue-gun or other glue if you don't like that.

---

Instructions:
(every photo is a step)

1. (Optional) insert M3x4 Press-nut in Part C
2. Glue servo in Part A1 (or A2 if you like that mount)
3. Glue servo horn in Part B. (don't glue it up side down)
   sand down flush if needed.
4. Put the servo horn on the servo (Don't forget to center your servo's)
5. Glue Part C on Part B
6. insert the servo screw
7. Glue the second servo in Part C
8. Glue the small servo horn in part D1 (Or part D2 if that fits you camera better)
9. Glue Part E over the servo horn
10. Put the servo wire over the servo and put Part D* on the servo.
    (if the servo is centered Part D* should be angled up a bit)
11. Now go to the other side of Part D* and put (Optional: a M3 ring in between Part C and D*) M3x10 screw inside
    This must be a little lose as this part should move.
12. Go back and put the servo screw in the servo.
    And your done!.

Thanks for making and please let me know wen it isn't working for you!