Pancar S280

This is a pan car based on the Serpent S240. A modified design was created by Ivan Martin found here _ http://myprotorc.blogspot.it/?m=1. His design took the S240 and shrunk it down to 102mm wheel base for use along side the Kyosno Mini-z. Ivan shared his files with me so I could modify it for my own personal use which I've uploaded here. My design was made with Tinkercad.

The top plate is connected using the 12mm spacers from a stand-off kit found on Amazon. The knuckle axles are pulled from broken stock MR-03 and MR-02 knuckles. The mid-mount motor mount and differential are also from the Kyosho Mini-Z series. The lexan body is the PN Pancar.
Parts List -
+3 Narrow wheels(Front)
MR-02 King Pins and C-Clips
Kyosho MR-02/03 Knuckle Axles
Kyosho MR-03 Stock Springs
DS-919MG Servo
LU-CC 180Pcs M2 Black Nylon Spacers Hex Nut Screw Stand-off Plastic Accesories Assortment Kit
PN Damper Spacer
PN Damper Plate
PN Damper Screw Washers
Kyosho Stock Damper and Spring
Kyosho MR-02/03 MM Motor mount
Kyosho Stock Differential
+3 11mm Wheels(Rear)
MR-02/03 Bearing Set
Various Screws from MR-02/03 Stock Kits

All of my progress and projects can be found on my Facebook page- https://www.facebook.com/byebyeracing/