Phonecubator

By Joakim Janstad

Check out video: https://www.youtube.com/watch?edit=vd&v=zxQu_chH9jU
Version 2: attach to your bike with an easy to remove solution... more rubber bands http://www.thingiverse.com/thing:1846707

Holding most phones in place using a rubber band loaded arm, this device will hold most smart phones and fits most bikes using a modern steering stem. I previously tried using clip-functions for the holders but with bad result. 3D prints usually breaks after a few uses. That's why I decided to go for a rubber band solution.

Confirm to work with Nexus 5, 1+3, Iphone 6s. Designed to also work for the Pixel phones but not yet confirmed to work. Probably works with most smart phones.

Use 2 rubber bands if one break your phone wills till stay in place. see pictures on how to attach rubber bands. Instead of using rubber bands try springs for a more long lived product.
I spray painted mine to withstand rain better.

Max dimensions of phone is 77x150x10 mm.
Min dimensions of phone is 59x120x1 mm.

Stem size top to bottom D 34.5mm
Stem size side to side D 32mm

Fits with M5 screws 50mm long and nylon threaded M5 nuts.

Now go catch 'em all