Split feet for Reach3D

Split feet design to get a better stability on your Reach3D.
Could be usable on any 2040 extrusion profile (other printers...)

NO TABS file : obviously, with no tabs =)
H TABS : for horizontal 2040
V TABS : for vertical 2040

All joints are perfectly symmetrical, so that you can print each foot in any other.

On the Reach, the better setup I had to improve stability is :

• 2x split feet H tabs, bed side
• 1x original foot by Ashaman (remixed from) extruder side.
  (had to get ramps board out of the way)

Put a Tnut underside, and one at each top of split feet tabs.

No more wooble when printing !