TI 99/4a FlashROM 99 Case

I received and assembled a FlashROM99 recently. It came as a bare board and I wanted a case to protect it.

Case is in two parts, the main case, and the cover
Before placing the board into the case make sure that the connector fits through the opening. Mine fit fine, but I would suggest check first incase you need to do any clean up. It's a tight fit to get the board into the case, Originally I had all chips socketed, but had to remove the sockets for the front 3 chips in order to be able to build a case that would fit. Also, when inserting the board into the case the solder connections on the large chip may snag. You will need to do be carefully putting the card into the case. The rectangular area at the back of the case make removal of the cartridge easier.

The cover stays in place via a friction fit, so I found it easiest to insert the front corners first, then press the rest of the cover into place.