Garmin Forerunner Watchband Adapters

Title
Garmin Forerunner Watchband Adapters

Description
I have large wrists and so I really liked pharao's wristband extension for my Garmin Forerunner 235. I really do not like silicon bands though, so after looking and not finding any, I decided to make an adapter so I could use a nylon watchband instead.
I have printed and use, the 22mm watchband adapter, but I figured I would design some more for anyone that may want a different size (if you print in another size and it does not work, or want a size not here, ping me). I am also working out an adapter to use as a paracord wristband and will upload when done.

Parts
None

Assembly
After printing, I have had the best success, using small drill bits to clean out the holes for the Garmin band pin (5/64) and the watch snap pin (1/16). You do not need to make the holes bigger; it was just helpful to perfectly round the holes.

Attributions
None, my original design, but I got the idea from: https://www.thingiverse.com/thing:634955

On Other Sites
On thingiverse, jumping ship, may take down there. - https://www.thingiverse.com/thing:2103941

Edits

Tags
220, 235, 620, 635, Adapter, Forerunner, Garmin, GPS, Smartwatch, Watch, watch band, wristband, wristwatch, wristwatch band,

Print Settings
Printer brand: Printrbot
Printer: Printrbot Simple Metal
Rafts: No
Supports: No
Resolution: .1
Infill: 35%
Speed: 30mm/s
Material: PLA
Notes: I wanted these to be as smooth as possible, so I printed these slow (@30mm/s) and at high res (.1mm). I also printed them @35% infill, which is pretty much solid for something