February 15, 2017
Description
IMPORTANT: while this part fit perfectly for me, people in the comments report it's too long. It was printed on my old printer that perhaps wasn't well calibrated, so if it doesn't fit please try the remixed version that's a little bit shorter.
Dell's dock compatibility is legendary, basically everything with an E-port will fit in every version of an E-port dock. However, Dell moved the docking port a bit further back on their newer laptops, requiring a spacer ("XJD0R") that costs ~13 euros.
Considering the fact that for 13 euros I can make almost 20 spacers myself, I decided to do just that.
Print with the top side down so you don't have to bother with supports.
As always the fusion360 file is included, so feel free to improve the design.
Even though I did not use any resources from Fyrftd's model, I did use some parts of his design. The main differences are in the support structures, mounting point and actual width of the spacer.
I don't know if it qualifies, but I marked this as a remix just in case.
License:
Creative Commons - Attribution - Share Alike
citruspers
