Raspberry Pi Repetier Server Case - Parametric

Raspberry Pi Repetier Server Case

Based on The Famous Ultimate Box maker: http://www.thingiverse.com/thing:1264391
I did some Modifications and fixes
Open SCAD RPI Model: http://www.thingiverse.com/thing:2023897
Corrected some Measurements and extended the Code to achieve a Model to generate Cutouts
-You can use this for RPI 2 and 3 Models

Also added some custom libraries for the additional Components

This is ment as a Housing for a RPI with an additional Mount for a 18650
Battery Holder (and Battery of course), a TP4056 Battery Charger with integrated
electronic Switch and deep discharge Protection and a Step Up Buck Converter to achieve
5Volts for The Pi and Peripherals

2017-02-16: Added a rudimentary Schematic to show how to connect the electronic components, added Resistor Table for Changing Charging Current

If you want to change the Charging Current, just replace R3 with one of the following Table:
R PROG(k) (R3) I BAT(mA)
10 130
5 250
4 300
3 400
2 580
1.66 690
1.5 780
1.33 900
1.2 1000
Note: Reduce the Charging Current only if you do have Problems with your Power Supply as LiIO Cells should not be charged to slow (0.5C is a good value)

Product Link to the Step Up Buck Converter: http://www.ebay.at/itm/272453916235?_trksid=p2060353.m2749.l2649&var=571463550717&ssPageName=STRK%3AMEBIDX%3AIT
Product Link to the TP4056 Battery Charger Circuit: http://www.ebay.at/itm/272445576112?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Battery Compartment: https://www.reichelt.at/Batteriehalter-fuer-sonstige-Zellen/HA-1X18650-SA/3/index.html?ACTION=3&LA=446&ARTICLE=141631&GROUPID=6538&artnr=HA+1X18650+SA&SEARCH=18650

Have Fun and Enjoy your Live :D
Aut0mat3d 2017 ..:)