April 23, 2017
Description
Protect your gimbals like true HiRates do!
The superb logo of our HiRates FPV crew reached the 3rd dimension and it's only purpose is to protect your beloved Taranis gimbals. Print either two of the single versions or one twin version with the bracket in between.
The stick holes are depending on the extrusion factor quite tight. I had to use an 8.0mm and an 8.5mm drill to make them fit to my sticks. My sticks have for mysterious reason not the same diameter :-). I suggest an infill of 50%.
If you print and use this thing give us some valuable feedback by posting it under the "Mades" section.
Time to enter your Taranis... HarrHarrHarr
Like us on Facebook: https://www.facebook.com/HiRatesFPV
Logo design by Daniel Schnitzer, 3D model by Hubert Fischer
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
sledgehammer46
