Rocker switch mount

I made this for a mate to use as a PCV Map Switch with his Dynojet Power Commander installed on his motorbike.

It's a fairly standard 20mm x 13mm rocker, though it will require snipping down of the switch terminals slightly as I didn't want the back to be too deep (see photo, simple snip takes seconds).

Mounting hole is 6mm Ø and there are two pin holes (for a paperclip) to help remove the switch again should you need to (and I did try it). Cable exit is 3mm Ø.

(He hasn't got it yet and may prefer to spend the $69 on the real thing)

Let me know if you use it :-)