Prusa i3 MK2/S Adaptor for 40mm Silent Fan

IMPORTANT: Get the latest updates for this model here on PrusaPrinters.
In 2021, all updates and uploads of new models were moved to PrusaPrinters, of course still free and under the same conditions... :)

Jure Korber made this really nice design for a 40mm Prusa fan adapter. To fit a 40mm fan on the Original Prusa i3, the fan has to bend outwards to avid collision with the left X axis motor mount. Jura made it tilt upwards as well, saving vertical space and better intake of cooling air.

I was looking for a minimal design, but still with a strong construction. Editing the original STL file is nearly impossible as it has a lots of curved surfaces. I decided to start all over with the fan specification and the twist... and ended up with a design very close to the original :-)

What has changed:

• Smaller 40mm fan base and re-enforcement for screws.
• Maximize air flow for cooling - No grill and adapter air outlet matches E3D air inlet.
• Thicker base for better Prusa mount.
• Fits Original Prusa i3 MK2 and MK2S.
• Close to minimal solution.

For assembly you will need four M3 10mm screws for the 40mm fan and four M3 10 or 12mm screws. See photos.

I use the 40mm fan SILENT 4 as it is quiet and moves enough air for cooling (eBay USD $10). The best solution is still the fan from Noctura, but at a higher price tag. Both the 10mm and the 20mm Noctura fan will fit the adapter without collision.

Update: Added model with M3 threading for screws mounting the Fan.