Summary

A teflon tube assisted filament guide for your Wanhao Duplicator I3 Plus! Also fits the I3 (non-plus.)

A mirrored version (file labeled bottom) fits the non-plus better as well as gets the guide closer to the extruder. Thanks to mnccouk for this idea!

You can use longer than a 5mm teflon tube, this is just the minimum to fit inside.

UPDATE: New "18mm" files should line up better.
Picture added: I align my cooling block all the way back on the carriage. Mounting holes are oblong.

Print Settings

Printer Brand:

Wanhao

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Wanhao Duplicator i3 Plus</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.20</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>~20%</p></div></p>

Post-Printing

5mm of Teflon tubing required.

            <div><p>Cut Teflon with razor blade to prevent making out-of-round.<br>Slightly persuade tube into appropriate hole with blunt object.<br>Use existing screws!<br>You're done!</p></div>

Filament Guide for Wanhao i3 plus

Filament Guide for Wanhao i3 plus

Related Models