Logitech C270 webcam Kossel XL 2020 front mount

This is a Logitech C270 webcam mount for 2020x3 aluminum profile, designed for a Kossel XL printer.

The webcam is approximately a 10cm distance from the printer, 5cm higher than the bed. It's perfect to view a full bed of 240cm diameter, if the webcam has a wide angle lens (170°). By defaut, this is not the case for this webcam, so you need to change the lens. Here is what I used.

• To assemble the parts (arm in the braket), you'll need a M3x12 to M3x20 screw with a M3 nut.
• To fix the webcam on the arm, you'll need a M3x30 (M3x35 works too) and a M3 nylstop nut.
• To fix the bracket on the 2020 profile, you'll need at least 2x M3x10 screw and 2x t-nuts (or 3 of each, as there is 3 holes).