Drill Bit Stand (Metric) with Additional Screwdriver Bit Slots

I definitely needed a new drill bit stand for the random bits I have. So I quickly knocked up a stand which can hold 2mm-20mm drill bits (1mm increments) and can also hold screwdriver bits in the holes in the bottom of the stand. The holes are all designed to be .25mm bigger than the drill bit size, so make sure your printer is calibrated well as mine came out at about .15mm-.2mm bigger than the round drill bit number (ie. my 10.25mm hole printed at 10.15mm, so the bit fit really well). If your printer is calibrated wrong and it prints the holes smaller, than you will be in trouble as the bits wont fit! So double check your calibration, and DON'T BLAME ME IF YOU PRINT IT WRONG!

Overall dimensions are L145mm X W65mm X H54mm.

My print was 25% infill, 3 top and bottom layers with 3 perimeter lines. I use a raft on all my prints but you might not need one here but that's dependant on your own settings. Printed in red ABS. Print time was 12.5 hours.