Inmoov Bicep Frame ,Dwg Format

Many Thanks to- Mr Gael- Inmoov’s Designer

These are the Bicep Frames Converted to .Dwg Format- for CNC/Laser Cuting there are all 7.5mm Thick but 7mm or 8mm “should” work fine,,,

For the 2 Stage Potentiometer Hole on the Bicep frame I have removed the 13.5mm Dia hole and just kept the 5mm Potentiometer shaft hole (used as a pilot hole),,,,, then you can just use a drillpress to drill it out to the size of your Potentiometer----- the original hole is 13.5mm Dia and is 5.7 mm deep,,,, and is actually a 3 stage hole with second stage having a notch taken out to stop the Potentiometer from spinning out of position (see pic)-
I also made the x2 screw holes on the sides of Potentiometer hole go all the way through to the otherside--

People use all different sort/sizes of Potentiometer and modify that spot to suit their Potentiometer--- other than that everything else should be pretty easy—iv used the original parts from Mr Gael and not modified ones,,, all I’ve done is join the 2x Bicep frames together (which was a Perfect fit) to make the one part –

The Bicep Frames are the same for both sides of the Bicep -&- for both Left and Right arm,,, so you only need the one file-- but have done both sides just in case the material you are using has a different Topside finish to the Bottom Side finish--

Note*-- I do not have a CNC/Laser Cutter and these files where done by request – there are the original STL converted to DWG – --and -Mr Gael- designed them 3d Printing not CNC/Laser Cutting so there will be problems as dictated by “Murph’s Law”

-=Mindless=-