Horizontal Spool Holder for the MP Mini Delta

Check out the remix by OMGrant. It is a great model and can be printed on the Mini Delta. It really is an upgrade to this. https://www.thingiverse.com/thing:3842898

Had a spool of Dremel PLA but it wouldn't fit on the spool holder for the Monoprice Mini Delta. Figured I'd make something to screw into the top of the machine instead of the handle. The post has a diameter of 17mm. Only tested with a spool of Dremel filament but I don't see why it won't work with a larger spool.
Take off the top panel by unscrewing the 6 inner screws on top. Underneath the panel there are 4 silver screws holding the handle on the panel. Remove those screws and take off the handle. Then line up the screw holes on the panel with the holes in the print and use the silver screws to secure the filament holder to the panel.
I plan on slimming this down so it is stronger and uses less filament to make. Maybe make a version with multiple parts to fit on the Mini Delta's printbed because as of now it cannot be printed on the Delta.
Thanks for looking and hope it comes in handy for everyone else!