PCB effector for Diamond Hotend/E3D v6 groove mount + various related parts

This is my version of PCB effector and carriage, inspired by dc42's PCB effector. The differences are:

• Bare PCB, without any electronics.
• M4 holes for the magnetic balls instead of M3.
• 60mm arm space.
• 2mm thickness

To create the PCB

Use the attached dxf files to define the PCBs' outline. The PCBs were made by EasyEDA by importing the DXF files to their PCB edtior to define the border outline. Texts and graphics were added using the editor.

To mount the Diamond hotend

Use the modified Kharar's cooler's shield provided. You need both diamond-on-pcb-effector.scad and Diamond_hotend_shield_no_mount.csg.

To mount the E3D v6 or clone's groove mount

Use 3 PCBs stacking in the different angles. It's a tight fit.

Rod-end

They should be printed upside-down (with the magnetic side up).

My build

• I'm using RobotDigg's carbon tube. 450mm/5mm/8mm.

• Magnetics + balls from 3D_HOME/AliExpress. They have M4 hole, so you'll need 12 x M4 screws + 12 x M4 nyloc nut nuts.