GoPro Session 52mm polarized filter adapter

Printed the grey part using flex filament (TPU). It won't work on PLA or ABS, since it need to fit inside the GoPro case.

Must use 4 x M2x8mm bolts - or hot-glue the two parts and use a blowdrier to change the filter when needed.

I had to use supports to print the flex part, but that maybe because my printer sucks printing flex overhangs. 10% infill on both parts.

SuperView mode can capture the lens frame. Use a narrow capture angle (wide) or crop a little.
I'll try latter to bring the filter closer and make the frame thinner.