September 28, 2017
Description
Ball and chain with hex shank. It fits into any drill. It spins around, fast or slow -- any speed you like.
https://youtu.be/ykmp0JAxb7M
The chain links may be slightly fused. They should break apart with minimal effort.
I printed this with 10% infill, thick shells, .2mm layer height, and low speed. I used an XYZprinting da Vinci Mini printer with PLA filament. The three supports on the base of the ball can be broken off by hand or cut off with a knife.
License:
Creative Commons - Attribution
esromj
