LasKKit Sound DIY 20W Bose Soundlink Mini Clone

Updated, Face and Back have new version.
Different switch and DC Connector.
I’m going to show you to build clone of the most famous and the best sounding in the class Bose Soundlink mini. The last four months I been collecting information about this speaker, trying to find simple, cheap and good sounding hardware. Also, a lot of time took to design enclosure, printing samples. This project is open source, you can download enclosure and print it, all parts are widely available on Ebay or AliExpress.
Next components are used:

1. 3D printed enclosure
2. 2x 10W 40mm 4Ohm Bose Soundlink Mini drivers (Clone) https://www.laskarduino.cz/2-reproduktory-bose-10w-4-40mm--klon/
3. Bluetooth Audio Module Sanwu with Yamaha YDA138 or Sanwu TPA3110 https://www.laskarduino.cz/sanwu-sw-hf47-v1-2-bluetooth-audio-zesilovac-2x15w-tpa3110/
4. 2x Passive radiators https://www.laskarduino.cz/bose-pasivni-membrana-pro-soundlink-mini--klon/
5. Li-ion 2S protection board https://www.laskarduino.cz/ochrana-li-ion-baterie-2s-3a/
6. Li-ion 8.4V 2A charger https://www.laskarduino.cz/nabijecka-li-ion-baterii-do-zasuvky-2s-8-4v-2a/
7. 2x 18650 Li-Ion Battery https://www.laskarduino.cz/3600mah-lg-inr18650-m36-10a-18650-li-ion-baterie/
8. Adjustable step-up module with XL6009 https://www.laskarduino.cz/step-up-boost-menic-s-xl6009--modra/
9. Connector DC 5,5/2,1mm https://www.laskarduino.cz/napajeci-konektor-dc-022-5-5-2-1mm-do-panelu/
10. 3A 250VAC rocker switch https://www.laskarduino.cz/posuvny-prepinac-0-5a-50vdc/
11. JST-XH-2, 2pin connector with cable https://www.laskarduino.cz/jst-xh-2-2-54mm-2pin-konektor-s-kabelem-female-male--20cm/
12. JST-XH-3, 3pin connector with cable https://www.laskarduino.cz/jst-xh-3-2-54mm-3pin-konektor-s-kabelem-female-male--20cm/
13. Wire about 0,5m
14. 8x M3x50 F-F spacers https://www.laskarduino.cz/distancni-sloupek-f-f-m3-50mm--nerez/
15. 22x M3x8 imbus screws
16. 10x M3 nuts
17. 2000uFx16 capacitor

You can find an instructable here: https://www.instructables.com/id/3D-Printed-Bose-Soundlink-Mini-Clone/
video here https://www.youtube.com/watch?v=3hAMheCrFG8