gcompsw (4:1 switch) Vertical Mount Brackets

These are brackets to mount the gcompsw (4:1) component switch (by superg) vertically to a panel. There are four brackets that mount to the screw posts where there is a screw collar installed as a spacer between the PCB and the bottom acrylic. Remove the screw, remove the collar, insert the bracket, and reinstall the screw. Now you have mounting points to put screws through to mount the switch vertically to clean up your video setup.

The mounting screw countersinks are designed to be used with #6 wood screws.

I also designed a gscartsw / gscartsw_lite version of this bracket, check my other projects.

Please note that these brackets will not fit the new gcompsw 8:1. I have confirmed with superg that the new gcompsw will fit the same brackets as my gscartsw/gscartsw_lite bracket.