Rock Solid Cr-10 E3d V6 5015 Fang with 40mm fan

---

UPDATE 2 :

EZABL and BLToch finally completed and tested are available here for purchasing:
EZABL: https://www.cgtrader.com/3d-print-models/hobby-diy/other/rock-solid-fang-with-ezabl-sensor-mount-3d-print-model
BLTOUCH: https://www.cgtrader.com/3d-print-models/hobby-diy/other/superstrong-fang-with-bltouch-sensor-mount

Regular version is free and available for everybody to download and print
(SOLVED Problem with fang mesh)

Update 1
Released versions with mount for EZABL and Bltouch for beta-testing

I could not find a fang mod for the cr-10 and E3D V6 that i liked because all hang from the 40mm fan, so i made this version which is rock solid and doesn't hang from the fan, but it attaches directly to the incredible "CR-10 Heavy Duty Modular E3D V6 Mount" and it is really sturdy.

The fang i Modded, and the 40mm fan duct are from " v6 Hotend Fan Shroud and 5015 + 40 Fang Combo".

The fang can be printed like a regular fang, with or without supports as you prefer, but i printed with no supports and came out perfect.

The X carriage Mount needs to be printed as it is oriented, and it DOES need supports!

The best materials would be ABS or petg, but i guess pla could hold just fine.

For the Hardware you will need:
To mount the x carriage Mount to the x carriage: 2x M3 6mm
To lock the e3d in place: 2x M3 30mm + 2 M3 Nuts
To attach the fang: 2x M3 10mm
To connect the 5015fan to the fang: 1x M3 25mm or a Ziptie
To attach the 40mm fan to the duct: 4x M3 20mm ( you could use only 2)

For more informations about the "heavy duty modular mount" here is the link to the page with detailed instructions: https://www.thingiverse.com/thing:2494642

Hope you will like it and that this will satisfy your crave for a decent fang for your creality and e3d v6 ( clone or not :P )

Good prints!

P.S. Tips are always appreciated :) http://paypal.me/neverstopseeking