SARACENO KNIFE BLOCK

Hello everybody!

I had bought a professional knife set at the last Black Friday sale on Amazon:
https://www.amazon.com/dp/B002ZCKIBM/ref=cm_sw_su_dp
the knive set didn’t come with a block, so I created one.

SAFETY FIRST!

I will speak about safety because this thing will be at home and knives may be dangerous, so I hope you follow the three important steps below:

1. Use magnets as described on the project, you can find them here:
   https://www.amazon.it/Magnetastico%C2%AE-neodimio-frigorifero-permanente-interattiva/dp/B00Z7YVU8A

2. Use rubber pads; print them with TPU95 or another rubber filament

3. Create the ballast with the milling machine - the one in my project has a weight of 2.3Kg

You need this hardware:

Phillips flat head self tapping screw 4.8mm x 22mm: 2pcs
Phillips flat head self tapping screw 5.5mm x 25mm: 2pcs
Neodymium magnets 8mm x 3mm: 4 pcs

Check everything else on the PDF and pics.

UPDATE 1 MAY 2018:
Added base without support for those who are lucky to have a bigger print volume