LCR-T4 Part Tester Case (MTester)

Since there are so many versions of the LCR-T4 tester and I wasn't able to find a fitting case on Thingiverse, I designed my own.

In addition to the printed parts, you will need:

• 4x M3 Screws
• 4x M3 nuts
• 2x Small magnet (8x3mm)

You may also need some tape to make the tester board a little bit thicker since depending on your printer, the board fit could be a little bit loose.

This is the tester I bought:
https://www.gearbest.com/boards-shields/pp_531727.html?lkid=13058651

I made a video about the tester and the case (in German):
https://youtu.be/apbzW4Rw1v4