Coleman Pop Up Camper Door Latch Handle

This is the handle portion of the door latch used on many different camper trailers and RVs over the years. On my camper the latch worked fine but the handle was broken, so I decided it would be good modeling practice for me to create a new one. For the entire latch assembly, the part number is 4742-9671, (https://colemanpopupparts.com/products/screen-door-latch) and can be purchased for around 12 or 13 dollars. But why buy what you can spend a lot more time making.

I have not tried fitting it on the door yet. The studs that accept the mounting screws may need to be reduced in diameter.

The part should be printed on end, for the most strength at the handle. You will need to use supports.

0.2 mm layers, 3 shells, 3 top and bottom layers, 15-25% infill I think would work fine.
Print a few and keep them in the camper for replacement.