March 16, 2018
Description
CR10/ Tevo Tornado C270 Camera Mount
4/27/2018
Added a long mount that has both mounting (with and without C270 Bracket) on the end.
BTW the long mount is a great place to add some LED's along the rail to light the part as you are printing.
4/18/2018
Added a longer taller camera mount that gives a little higher aspect and more bed area view. It adds 20mm to height and 50mm to length.
Here is an example of the video you can expect.
This is similar to a few of the bed mounts out there with 1 simple but important feature the others don’t incorporate. The similar mounts I have tried seem to be fairly loose to the plate. They incorporate a hole completely thru the top side of the clip to allow the spring to sit back on the plate and the clip to ride freely around it. I thought, instead of making that hole all the way thru why not make it a pocket and use the spring tension to help hold it fast. My mount incorporates this feature.
Example videos using this mount. “A Benchy Is Born”
***** *****“Print Orientation”
License:
Creative Commons - Attribution
dpetsel
