This Design is part of the [Ideenreich tool wall.](https://www.thingiverse.com/Fablab_Ideenreich/collections/ideenreich-tool-wall-werkzeugwand "Ideenreich tool wall")
These are Knipex compatible plier wall mounts.
Dies sind Knipex-Zangen kompatible Wand Halterungen.
Compatible with other pliers with the following max. plier head measures.(a few mm smaller pliers should be ok)
Kompatibel mit anderen Zangen mit folgenden max. Zangenkopf-Abmessungen.(ein paar mm kleinere Zangen sollten funktionieren)
Knipex 03 06 180 (26,1mm x 10mm)
Knipex 25 02 160 (16,5mm x 8,2mm)
Knipex 25 05 160 (16,5mm x 9mm))
Knipex 26 11 200 (17,9mmx x 9,4mm)
Knipex 26 16 200 (17,8mm x 9,4mm)
Knipex 26 22 200 (18,2mm x 10mm)
Knipex 26 25 200 (18mm x 9,6mm)
Knipex 30 11 140 (14,9mmx x 7,7mm)
Knipex 35 22 115 (10,9mm x 7,1mm)
Knipex 70 01 125 (15mm x 9,5mm)
Knipex 70 02 160 (22,8mm x 10,2mm)
Knipex 70 05 160 (22,8mm x 10,2mm)
Knipex 70 06 160 (22,8mm x 10,2mm)
Knipex 70 06 180 (23,4mm x 10,5mm)
Knipex 78 61 125 (23,5mm x 8mm)
Knipex 97 72 180 (23mm x 11mm)
For **custom** plier mounts open the custom_plier_wallmount.fcstd in freecad(tested with 0.18). change the size in the spreadsheet and export "export_this" from the treeview with strg+e.
Design by Dirk Feyerabend
Fablab_Ideenreich
