LiTeRo - The Little Telepresense Robot Kit

This little robot can be a lot of things. You can make it as a remote controlled rover with just a couple ESCs and a radio, or you can make it fully autonomous with a Raspberry Pi Zero!

Demo Video:
https://www.youtube.com/watch?v=ou1JUl3icZU

Build video:
https://www.youtube.com/watch?v=gO9KHxSDaMg

Full write-up:
http://thestuffwebuild.com/litero-the-little-telepresence-robot/

Basic assembly requirements:

• 1x - Pololu 22T track set
• 2x - N20 Gear motor (6V; 180 to 300 RPM recommended; encoder optional)
• 4x - M3 x 15mm machine screws (for motor mounts)
• 5x - M3 x 8mm (for body mounts and battery cover)
• 2x - M3 x 10mm (for body mounts)
• 11x - M3 nuts

Advanced assembly requirements:

• Above parts plus:
• 2x - M3 x 10mm (for charger dock bumper contacts)
• 4x - #4 x 1/2" wood screw (for RasPi Zero board)
• 2x M3 x 15mm (for charging dock)