Voronoi blowball Flower - Lighted Decoration

To support me & find new as well as updated designs from me look here: https://www.printables.com/@universalmake_168616 (follow there I am step by step updating my designs. Downloading there helps me massively!) Don't miss something, subscribe here on thingiverse or on instagramm https://www.instagram.com/universalmaker/ In order to use cusomizer, downbload the files and use Openscad's customizer! Project of the week on all3dp !: https://all3dp.com/project-week-diy-voronoi-blowball-flower-lamp/ Instructions: Parts: LEDS: https://www.ebay.de/itm/10-Stueck-LED-5mm-RGB-Auto-Regenbogen-langsam-10000mcd-/372143426180 stepdown controller: https://www.ebay.de/itm/1-Stueck-Spannungswandler-f-Blink-Flacker-und-Effekt-LEDs-AC-DC-5-24V-12V-/352072992295 A switch: https://www.ebay.de/itm/Mini-Kipp-Schalter-3pins-Schalt-Aus-Schalt-fur-Modellbau-LED-Elektronik-10-Stuck/301836411890?hash=item4646da23f2:g:LtkAAOSw629at4oA Cheap filament: https://www.gearbest.com/3d-printer-supplies/pp_651311.html?lkid=14780363 This is a cool DIY lamp project. If you want to enlight it, you need a switch(as in the pictures), cables, LEDs, resistors and a 9V battery. The LED's are put through the holes at the end of the top part and connected via the switch with the battery. I took here a Voltage converter to control the LED's, and I used colour change LED's You need every part and to assmble it like in the picture. The Top and bottom wil side perfectly over each other(maybe you have to sand it a little bit.) The bowls are glued with superglue to th ends of the stems and then hold also the led's in place. You migt have to use a dremel or a drill for a bigger hole in the flat side of the balls, to fit the leds onto Happy working! Printed with the Flsun Cube: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_708167.html?lkid=14677136 video: https://youtu.be/_vac6h-7gqI