Land-Surf.com EGO Battery Mount for Onewheel Plus or V1

This is the EGO Battery mount and protective terminal cap, part of the Ranger product from Land-Surf.com. With it, you can mount an EGO battery to your Onewheel and get 2x your normal range. All of the EGO batteries share the same mount (universal fit).

NOTE: This file is not to be used for commercial purposes. By downloading you agree that it's for personal use only. Thank you for understanding!

UPDATE: I've updated the main .stl so now there is a place on the back of the mount to store two XT60 silicone caps (links below). This cap goes on the battery cable that comes out of the OW battery (since it's a live connection all the time - best to cover it when not using) You can buy these little silicone caps here: https://www.amazon.com/HobbyKing-Charged-Discharged-Battery-Indicator/dp/B01MDM9AKN/ref=sr_1_1?ie=UTF8&qid=1533148898&sr=8-1&keywords=silicone+xt60+caps&dpID=412v%252BaMIlwL&preST=_SX300_QL70_&dpSrc=srch

You will also need these supplies:

1. 4 M5x16 flathead screws
2. 4 M5 low profile nuts
3. Battery terminals cut from 1mm steel, drilled with a 4.5mm bit (see posted pdf for template)
4. 4' or so of high quality 12 gauge wiring (Deans wet noodle) and 2 ring connectors
5. 2 EC3 connectors (1 male, 1 female)
6. 2 XT60 connectors (1 male, 1 female)
7. Shrink wrap tubing
8. Soldering Iron and solder
9. Power drill and drill bits
10. EGO 2.5AH and EGO rapid charger.
11. 2 M4x8 and 2 M4 nylock nuts

The installation instructions are also posted above.

Note that doing this installation will void your warranty on the battery and battery box.

OR you can run this as a VNR setup (direct wire to your XLR charging port) and that will not void your warranty. However, it's not as powerful as the battery-wiring method.

You on are on your own with this, so please do not attempt it if you are not adept at 3D printing TPU. You must also know how to solder well, use power tools, and generally know your way around a workshop.

Great TPU choices are Sainsmart or Priline:

https://www.amazon.com/gp/product/B074DV9JMX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Also keep in mind this project will void your warranty, because you have to open the battery box. If you're not comfortable doing that, please don't try to install it without help.