The Kitchen Sink (fishing lure)

I have a video of assembly instructions here: https://youtu.be/PVF75UIMdGU

It also has some print suggestions.

Basically cotter pins are cut and glued into the holes at the bottom of the sink bowls and you can use a "larger" like size 4-5 snap ring for the "bill" hole to hook line to it.

I don't know if I would suggest fishing with this thing but if you do please post a video or a picture and @ me. Especially if you catch a fish that would make my year.

I printed it sitting flat with supports up to the counter top portion and supports to the faucet. It seemed to work well. I did 0.1 mm LH at 100% to get some more strength, I'm sure 0.2 mm layers would be no problem. The cotter pins are the small 1/8" standard smaller ones CA glued would work as well as long as you can get the snap ring inside the diameter.