Petsfang Bowden Direct with Bondtech BMG for CR10/S/4, Ender3 and Tevo Tornado

http://www.petsfang.com/ ***** Petsfang Bowden Direct with Bondtech BMG ***** This mounts the same as the Petsfang Titan Direct Mod. You can get installation instructions for the Titan at: http://www.petsfang.com ***** ***** Release Notes By Date: ***** ******* 11.2019 Thank you Ippyswitch99 for a rendered version of our Dualfan 5015 duct for the E3d Volcano. File name is : bmg_volcano_dualfan_ippyswitch99_11.2019 6.17.2018 Apparently a little more clearance is needed to get the rear arm on the Bondtech to open all the way. I adjusted all bases for this clearance. If you have already printed the bases you can make a small notch with a Dremel or an Exacto. New base files 6.17 have the clearance. 6.15.2018 - 11PM Was downloading and checking files and noticed the 2- 40mm cap files were a prior versions. Uploaded the correct versions. 6.15.2018 Changed all the base files to give you the option to add the BLT mount to the left side of the base. The BLT can mount to either side. Just download the appropriate mount. It seems the left side works better for overall bed probing if used on the left for the Ender 3 & 2. The mount is adjustable so no matter the hot end you will be able to get the correct height from the bed. The base files work with any of the parts previously downloaded.