Improved Spool Holder - custom angle for UP PLUS 2

###BEFORE YOU PRESS PRINT:
If you only use UP's original spools, UPPLUS spool small.stl will suffice. The big version just features a longer arm and as a result may require smart placement to be printed with an UP PLUS 2.
Before printing, I recommend you rotate and lay the 3D model flat or sideways (see the two attached pics).

====================

###INFO:
The white spool holder in attached pics came installed with my machine, it was about 11.2cm tall and straight.

But my plastics gets snapped off after a while of not using it at a weird angle.

I re-designed and replaced the spool holder with the orange one in the pics.

====================

###SIDENOTE:
The orange one I printed in the pics is actually 80% size of the attached UPPLUS spool big.stl. (Which I remixed from Spool Holder for the UP Plus 2 by 3DPrintingSystems.)
The size was right but the arm looks a bit weak therefore I designed UPPLUS spool small.stl.
As a result, I have only print-tested 1) UPPLUS spool small.stl; and 2) 80% scale of UPPLUS spool big.stl.
Ask anything if you encounter any problems. Happy printing!

My settings for print:

• 0.2mm L.thickness
• 15% infill (probably irrelevant)
• quality normal
• with support
• No raft/ with raft
• PLA (ABS might be better in terms of rigidity and strength)