CR-10S 100% Printable Reel Mount Bracket (Including printed Bearing). For reels up to 4.5kg

Download the .zip file that contains the STL HD files.
The others are only there for the graphical representation of the system.
The reel on the picture is a 4.5Kg reel.

This system can be used if you have previously reinforced the arch of the Z axis.
Be careful though, the bearing is particularly technical to print.
For example: with too much filament flow, the parts of the bearings will stick together.

The spool holding screw is equipped with a 1/2 turn quick thread to avoid having to screw for 2 minutes when using small spools

I printed the test version that is on the picture with PLA to check the feasibility of the project. I chose PLA because it is a material that sticks a lot and also because it is the most common.

However, considering the weakness of the PLA against the moisture, heat and time, I recommend printing this system with a more durable material.