Cat Scratching Post / Tower Saver Support

If your cat scratching post or cat tree / tower has started to get wobbly then this could fix it (It did ours)

This cup adds strength back to tired old cardboard tubes that make up cat scratching posts and cat towers. The cardboard tubes start to bend or weaken on the ends and start to lean over.

Just unscrew the post push the new cup over the post and re-screw back down. It should then be nice and tight and upright again.

I made it tight so the post is a snug fit, push it in to start it off and then as you screw it down it will pull down tight in to the cup.

This will fit a 62mm diameter post, if yours is a slightly different size just scale to fit.

Ours was about to be thrown away 18 months ago and is still going strong since I fitted these.

Please post a make if you print one, it's always good to see one someone else has made.