If you have a bulky old Quanum Cyclops V1 laying around, just turn it into a sleek FPV monitor for spectators.
You need:
Quanum Cyclops V1
XT60 Connector (optional)
4x M3x12 of M3x15 screws
double sided tape (1mm)
ToDo:
Open your Quanum Cyclops and remove the electronics
print the top and bottom part
remove the round power connector and solder a XT60 male plug to the cable (optional)
or: print the RoundPlugAdapter to lead the original cable out through the XT60 hole.
this way, no soldering is needed at all
place all electronic in the bottom part, organize the cables carefully
put stripes of double sided tape on the RX and the button PCB
place the LCD screen on top of the components carefully
place the top part (frame) on the screen and tighten the 4 screws.
That's it, connect FPV antenna an 2-3S LiPo and go!
edit:
i added a second back-part with the betaflight logo, beside that, it is identical to the normal back-part. Don't forget to flip it 180°, then no supports are needed.
dermatin
