Isobutane camping stove stand with pin fasteners & cap

An adjusted version from the original by PookY(https://www.thingiverse.com/thing:814321).

This one is slightly thicker to allow the use of pins that you print instead of screws. Two sizes of pins are provided, use the regular one first, if it doesn't fit and you can't easily sand it down to smooth it out, try the thinner one.

Print 1 center piece, 3 of everything else. The clips have a slight angle on the top, that goes up to match the angle on the pins.

The cap isn't threaded but just barely fits over with friction.

I'm also working on a print-in-place hinge and snap together version that won't take any pins or screws at all, stay tuned for that if I can get it working.

Pin idea from here: https://www.thingiverse.com/thing:1274701