Cocoon Create V2.1/Touch Y Bracket for heat bed wires strain relief

Hi,

This is a Cocoon Create V2.1/Touch Y Bracket for heat bed wires strain relief design specifically for the Y Carriage which I purchased with the help of the Cocoon Create / Wanhao / Balco 3d printers Australia facebook page https://www.facebook.com/groups/CocoonCreate/ :)

I recently updated my Cocoon Create V2 with a new Y carriage and also installed a Anycubic Ultrabase. Both have changed this printer from a unreliable printer, or a printer that I love to use, and rarely get a failed print from.

The Y bracket takes the strain out of the wires moving around and potentially causing issues with the solder to the head bed. It clips on to the Y carriage and the wires are then zip tied to the bracket. I've tested this, and found it removed all the twisting of the wires that I was experiencing, and also didn't cause any issues with the stock Y motor at the back or the frame. I also placed a Zip tie inside the wrap to make it stronger, as the Anycubic Ultrabase wires are rather soft and bendy.

Enjoy, and if you like the design feel free to modify it for your Y carriage.