Summary

I broke the spinner of my balsa glider. As the replacement was not available at that time, I printed a new one.

As it's very thin, it's a rather delicate print and definitely need supports if you print it large diameter down. I didn't try printing it tip-down yet which would work without support but will need a brim in every case.

Print Settings

Printer:

Anycubic Delta Linear Plus

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.15</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                    <strong>Filament:</strong> Surreal ABS                Gold                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Make sure you print slowly. As the part is so thin, a brim could help but would also be almost impossible to remove without damaging the part.</p><p>I printed it in ABS and gave it a quick acetone dip to fuse the layers together a little bit better.</p></div>

Replacement spinner for CAM FOLDING 4,7"x2,4"

Replacement spinner for CAM FOLDING 4,7"x2,4"

Related Models