H0 garbage dumpster 1/87 scale

This is my design of a garbage dumpster in H0 scale. This is printable with a standard 0.4mm nozzle.
I printed the dumpster in pla and after a bit of sanding painted with acrylic colors.
The top is made by two pieces that need to be glued.
Printer settings must be tuned a bit to have a better print. I had succes printing at least two ore more pieces at a time in separete prints (1 print for bodys and another print for the top)

my printer setting:

• layer hight 0.1
• infill 0%
• 2 perimeter
• layer width reduced to 0.47mm (necessary to print the top, default is 0.48mm in S3D but the sliced top had holes with this value)
• extrusion multipy 0.85
• fan speed 100%
• brim for the top only
• speed 60-70%