Pellet Extruder - Prototype

THIS IS A PROTOTYPE/CONCEPT. I HAVE NOT PRINTED THIS.
I DO NOT VALIDATE THAT THIS WORKS, YET :).

I made this design to promote a new concept of "open source" pellet extruder. I designed this with easy commercial items to reduce costs. If you know about other material that would better the design, please share :).
DOWNLOAD LINK ORIGINAL FILE:
https://a360.co/2OD2y9w

PLEASE READ:
This design uses this pulley and this 14 mm. screw.
https://www.amazon.com/2GT-Timing-Belt-Pulley-Closed-loop/dp/B01M2DL73S/ref=pd_nav_hcs_rp_2?_encoding=UTF8&pd_rd_i=B01M2DL73S&pd_rd_r=83f7433a-a3f9-44ec-b325-b3c74a326126&pd_rd_w=84bjE&pd_rd_wg=v5Hn2&pf_rd_i=nav-high-confidence-slot&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=1f389e35-a4a8-4fe9-bcb3-352102c5df87&pf_rd_r=BE4EK2RR5EHH35M4T72S&pf_rd_s=nav-high-confidence-slot&pf_rd_t=40701&psc=1&refRID=BE4EK2RR5EHH35M4T72S
http://bit.ly/2RYx1g3

I was planning to print the barrel on Shapeways, its approx $170.00 USD. which is actually not very expensive for a full metal print.
It uses commercially available 12V 40W-50W heaters. If you use 24V, you can probably put 2 in parallel. otherwise, a mofset for the extruders or another power supply may be required.

A spinner ball bearing is used as well.
I´m not very sure if these nozzles can withstand the pressure from the plastic coming out. I was planning to metal print some nozzles as well.
http://bit.ly/2PHd7oC

THINGS TO CONSIDER:

All plastic parts should join metal parts with epoxy glue to maximize stiffness.
Many people told me that the design would need more cooling or fewer heaters.

If you would like to collaborate personally with this design, feel free to contact me:
[email protected]

Long live the open source community!