Eye of Agamotto motor adapter

These parts can be added to the Eye of Agamotto model found here:

https://www.thingiverse.com/thing:1929165

This model allows you to drive your Eye of Agamotto with a stepper motor. This model is specific to the stepper motor found on Amazon.

Look for:
0.9deg Thin Nema 14 Stepper Motor Bipolar 0.5A 7Ncm/10oz.in Φ36x12.5mm 4-wires

The code for it can be found here:
https://github.com/tacotown/eye-of-agamotto

There are two models here:

1. Motor adapters: These glue inside the model in the track that the hand crank spins in. Print two and glue them on opposite sides.
2. inner eye adapter; attach to motor spindle.

Note: The inner eye model is scaled very large; for me, I was able to scale it to .1% to get the printed size right.

Instructions:
Glue the two motor adapters on opposite side of the track. Place the inner eye adapter on the motor spindle. Place your motor and make sure the inner eyelids work. When happy with placement, drill holes into the motor adapters and install the motor with two small screws.

Disclamer: printers and filament are different, and these pieces require a level of precision that one model may not cover; you may need to toy with things a bit.