Pololu Zumo 32U4 Shell Cover Back

Cover for Pololu Zumo 32U4 with extenders for the buttons. I can see the serial lights through the button gaps which worked well enough for me for now.

Todo:

• USB port not lined up properly, must be cut by hand for now
• Buttons near the edge harder to use (make standoffs slightly longer?)
• Add light pipe for LEDs?
• Design support so the LCD screen doesn't get pushed down too far
• Add some accommodation for weights.

Installation is much easier if you pull off the LCD screen first, press it into the cover, then plug the cover LCD into the bot.

Pictured version printed in Proto-pasta Matte Fiber HTPLA

Face is available here: https://www.thingiverse.com/thing:3182679