Mini Power Supply Cover

A power supply cover for 100mm wide power supplys.
Printing at 0.3 in cura makes the printing time about 2 - 3 hours depending on infill and perimeters.

Please like this thing to help support me as a creator!!!

Check Out My Youtube channel: (don't judge me i'm new to the youtube thing)
https://www.youtube.com/channel/UCjAuDpiw1tD_dRderr9KXRg?view_as=subscriber

And My Tinkercad:
https://www.tinkercad.com/users/6gAAWdVj2qV-baileywilliams

And MyMiniFactory:
https://www.myminifactory.com/users/BaileysElectronicsRoom

AND My Website:
https://baileywilliams2.wixsite.com/myroom

WARNING: Wait at least five (5) minutes after turning off the input power supply
before performing maintenance or an inspection. Otherwise, there is the danger of
electric shock. Motor control equipment and electronic controllers are connected to
hazardous line voltages. When servicing drives and electronic controllers, there may be
exposed components with housings or protrusions at or above line potential. Extreme
care should be taken to protect against shock.
Stand on an insulating pad and make it a habit to use only one hand when checking components. Always work with another person in case an emergency occurs. Disconnect
power before checking controllers or performing maintenance. Be sure equipment is
properly grounded. Wear safety glasses whenever working on electronic controllers or
rotating machinery.