Raspberry Pi Camera System for IKEA Jansjo LED Lamp

This is a system of parts that attaches a Raspberry Pi Camera Module v2 (picam) to an IKEA Jansjo gooseneck LED lamp. Parts include an enclosure body and lid for the picam, a mount for the neck of the Jansjo lamp, and a clip for routing the picam ribbon cable along the Jansjo gooseneck.

Files picam_body_modified_revA.stl and picam_lid_modified.stl are remixes of the Creality Ender 3 Pi Cam Mount by sn4k3 at https://www.thingiverse.com/thing:2987719. Modifications consist of moving the hinge mount from the lid to the enclosure body. This allows the ribbon cable to leave the picam enclosure behind the hinge, which is necessary for this mount to be used as intended. Removing the hinge mount from the lid also allows the lid to be printed in a natural, horizontal orientation without any supports. The revA version of the body stl has been processed through netfabb to fix errors that were reported in slicing the original body STL with Simplify3D.

File Jansjo_neck_clamp.stl is the part that attaches to the neck of the Jansjo lamp. A hinge connection between the clamp and the camera enclosure allows the camera angle to be optimized for image illumination.

File Jansjo_ribbon_clasp.stl is a part that clips onto the gooseneck part of the Jansjo lamp for routing the picam ribbon cable along the gooseneck.

I also have a custom mounting base for the Jansjo lamp. See Stylish Mounting Base for IKEA Jansjo LED Gooseneck Light at https://www.thingiverse.com/thing:3327503.