Summary

Replacement wheel for the Igea Compact vacuum cleaner. Slightly modified in some parts for strength and easy printing.

Print Settings

Printer:

Modded Craftbot

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.25mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>33 %</p></div></p>                                                    <strong>Filament:</strong> Any PETG, ABS, PLA                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Place with outer side down, it needs support there, but that surface is later covered by the original cover and invisible. Print a bit hotter than usual for greater strength.</p></div>

Post-Printing

Remove supports and clean up the print.
Now you have to disassemble the old wheel: Using a thin screwdriver, lever the outer cover off the original wheel. Then pull off the rubber part. Do this by levering a small part out of the groove that you can then grab and pull the entire thing off.
Now to assemple the new wheel: Place the rubber part on the printed wheel and insert the flanges in the grooves. Now just snap the cover in the three holes. Congratulations, you have a new wheel!
Insert the wheel axle in the hole and screw on the holder disc using a 3,2mm wood screw. Repair finished!

Wheel for the Igea Compact vacuum cleaner

Wheel for the Igea Compact vacuum cleaner

Related Models