10$ Electric Mountainboard motor mount for MBS/Trampa trucks 5065/5045 racestar

the 10usd mountainboard motor mount for 5065 motors

here's how to make a motor mount for mbs or trampa mountainboard under 10usd or 8e in 4 simple steps (printing not included) the parts list is under it btw have fun

this mount is pretty simple to setup and works with any mountainboard truck that has a 8m hole for braking system like MBS ats and every Tampa trucks
i used stainless steel but inox or regular wil do just fine

1-use the 8m rod in the holes on the truck and clap down with 2-8mbolts
2-slide over the 3d printed mount (prototype first before instaling) use 2-8M bolts
3-instal 5065 motor(s)
4-horizotaly mount the 4-5M rods with the 16bolts
i printed it in ABS because PLA can become brittle in low temp other then that it works fine and i used a 80% infill

for a twin engine setup you need
-2-- 5065 motors ( i used racestar 5065 200kv)
-2-- 8M theaded rod +/- 18cm
-4-- 5M theaded rod +/- 25cm
-8---8M srews (selflock nut or thead locker is advised)
-16--5M srews (selflock nut or thead locker is advised)
and a gear system as you like
i have best result when a bearing fits the wheelpulley itself
like on evolve pulley's but a chain works also
with a belt setup this pulley works best for me

IF YOU NEED ONE FOR 6354/6374 motors you can find it here
https://www.thingiverse.com/thing:2901312