February 6, 2019
Description
V1:
Primarily designed for micro quads (16AWG) but large wires will fit in most cases.
Goal is to prevent the balance lead flopping around whilst flying.
Made a closed version since I tend to take Lipo's on planes and the highly appreciate if you not only the XT30/60 but also the balance lead.
V2:
Now 2S, 3S, 4S, 5S and 6S version
Increased opening to 2.7mm to fit 16AWG even with harder materials
Increased internal diameter to fit larger wire (except 2S version, this one has been made smaller)
Increased tolerances a tiny bit
V2 closed has almost has no gap for thin wires.
If you want different sizes please let me know.
I print this is very soft TPE but anything shoud do, even rigid TPU.
Printed with 0.4mm nozzle with 0.2mm layer heigher, 100% infill.
Weight: 1gram for 4S version
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
Redeque
