Tiny Tina - Adafruit Sequins LED Landing Feet

Wanted some head-light/tail-light LEDs so I used a flipped version of the original bottom frame and generated this mounting plate that serves as both landing feet and as mounts for Adafruit Sequin LEDs (https://www.adafruit.com/?q=sequins). Be VERY gentle inserting the sequins. They should pop in with minimal effort. The tab holding them is easy to break if you push too hard.

Adding these LEDs uses an open 5V and GND pad on the flight controller. Be advised that this may or may not affect flight time due to added weight and current draw. Figured I'd upload this anyway and give people the option. Maybe someone better at wiring could end up with a lest wasteful method.

I welcome any helpful comments for making this better.